Filter
Top Products
6
Pull firmly at the base of the forehead pad plugs to release the
forehead pads from the forehead support.
CLEANING THE MASK IN THE HOME
Note: Wash the headgear before first time use, as the dye may run.
It is important to always hand wash the headgear.
WEEKLY
Hand wash the headgear in lukewarm, soapy water. Use pure
soap. Rinse well and allow it to air dry out of direct sunlight.
DAILY/AFTER EACH USE
Hand wash the mask components in lukewarm, soapy water. Use
pure soap. Rinse the components well and allow them to air dry
out of direct sunlight.
CAUTIONS
• Do not use solutions containing bleach, chlorine, alcohol,
aromatics, moisturisers, antibacterial agents, or scented oils
to clean any part of the mask system or air tubing. These
solutions may cause damage and reduce the life of the
product.
• Do not expose any part of the mask system or tubing to
direct sunlight as it may cause the product to deteriorate.
• If any visible deterioration of a mask component is apparent
(cracking, crazing, tears, etc), the mask component should
be discarded and replaced.
!
60880r2.book Page 6 Thursday, October 20, 2005 11:55 AM