Filter
Top Products
Cleaning Your Shaver
To assure smooth, efficient perfor-
mance, it is important to clean your
shaver. Cleaning your Remington
®
Shaver is easy.
1. Remove the Head
Assembly by holding
onto the sides of the
Head Assembly at
the arrows, press
the two head release
buttons while gently
lifting the assembly
away from the shaver.
2. Tap the base of the Head Assembly
lightly on a flat surface. This
should dislodge most of the hairs
trapped within it. To guard against
inadvertent damage, do not
remove the Foil Assembly.
3. Next, clean the
Cutter Assembly
while it is still on
the shaver. Hold the
shaver and Cutter
Assembly as shown,
and using the brush
supplied, lightly brush and blow
the hair clippings from between
the blades.
Tip: To help reduce wear and tear,
spray the Head Assembly with
Remington
®
Spray Shaver-Saver
®
Lubricant after every shave. This
helps remove hairs while keeping
your shaver operating smoothly.
8
9
Cleaning & Maintenance
Cleaning Cautions
■ Do not use an aggressive cleansing
agent as this may destroy the
shaver coatings.
■ Do not remove or replace the head
assembly while shaver is running
as it may cause damage to the
unit's screen or cutter.
Trimmer Care
Cleaning
■ When you clean your shaver, just
brush off any clippings that may
accumulate around the trimmer
assembly.
■ Every six months apply a drop
of light machine oil one-third
and two-thirds of the way along
the blade.
■ Using your fingertip, spread the oil
along the teeth.
■ Run the trimmer for a few
seconds to distribute oil.
33236_XT-100_IB-Revised.indd 8-9 2/1/07 3:04:54 PM