Filter
Top Products
Getting Used To Your Shaver
As with every shaver, your shave will
improve over time. Allow about three
weeks to develop an effective shav-
ing style and for your skin to adjust
to the new shaver. The adaptation
period may take a little longer if your
skin is sensitive, if you are switch-
ing from a different way of shaving,
or if you alternate between shaving
methods.
When you first removed your shaver
from its box, you may have noticed
what appear to be small particles
of white or gray power on the foil
in or around the cutter assembly.
The particles are from a coating of a
special lubricant applied to the new
foil and cutters to smooth breaking
in your new shaver. They will disap-
pear with use.
To shave
Slide the ON/OFF button upwards.
Hold the shaver so the foil is
perpendicular to your face. This
allows the shaver to work the way it
was designed for the closest shave
and minimum wear. Avoid holding
the shaver at an angle. This will
distort the screen and could cause
skin irritation.
NOTE: This shaver is designed only
to operate from it’s batteries: it must
be charged before using.
Shave with short, circular strokes.
Use your free hand to stretch your
skin. This encourages your whiskers
to stand out, making it easier for
them to enter the cutting chamber.
Never press hard. Pressing only flat-
tens your whiskers, making it harder
for them to enter the cutting cham-
ber. It will also wear out the cutting
surface more quickly.
7
6
How To Use
Before you begin:
■ Wait at least 15
minutes after
getting up before
shaving, to ensure
the face is free of
puffiness that may be present from
sleeping.
■ Make sure your
face is clean and
dry before starting.
■ Always use a clean,
dry shaver.
6
12
9
3
33236_XT-100_IB-Revised.indd 6-7 2/1/07 3:04:31 PM