Filter
Top Products
ReliOn
®
Customer Service Line: 1-800-726-9855
E-1
WHAT DISPLAY SYMBOLS MEAN
Display
Symbol
Condition/Cause
Recommended
Action
The symbol shown while measure-
ment is in progress. It blinks while
detecting the pulse.
Measurement is in progress,
remain as still as possible.
An irregular heartbeat or body
movement may have occurred.
Refer to page E-8 for more infor-
mation on irregular heartbeats.
Take measurement again and
consult with your physician.
Previous measurement stored in
MEMORY.
The battery power indicator dur-
ing measurement.
Replace all batteries with new
ones when the symbol blinks.
Alkaline batteries recom-
mended.
The batteries are low when it
blinks.
Unstable blood pressure due to
excessive body movement.
Try the measurement again.
Remain very still during the
measurement.
The systolic and diastolic values
are within 10 mmHg of each
other.
Fasten the cuff correctly, and
try the measurement again.
The pressure value did not
increase during inflation.
Check for air leaks along the
tube and around the air socket.
The cuff is not fastened correctly.
Refasten the cuff and retake
measurement.
There is an air leak in the cuff or
monitor.
Make sure tube is properly con-
nected to cuff and monitor.
The pulse is not detected correctly.
Try the measurement again.
Remain very still during the
measurement.
Cuff Inflation Meter
Measurement is in progress,
remain as still as possible.
Pressure Rating Indicator™
Refer to the section “About
Pressure Rating Indicator” for
further explanation. Page E-9.