Filter
Top Products
ReliOn
®
Customer Service Line: 1-800-726-9855
E-6
Press the START button. The average reading (see Pg. E-9) is displayed, 4.
the cuff pressurizes, measurement will begin and the Cuff Inflation Meter
will show on the display screen. It is normal for the cuff to feel very tight.
Note: If an appropriate pressure is not obtained, the device
automatically starts to inflate again.
Caution: If you wish to stop inflation at any time, press the
START/STOP button again.
When the measurement is complete, the systolic and diastolic pressure 5.
readings and pulse rate are displayed. The cuff deflates and the monitor
automatically shuts off after 60 seconds, or you can turn it off by pressing
the START button. Your measurement is automatically stored in memory
(the monitor can store up to 90 readings in memory).
Remove cuff and make note of your blood pressure and pulse rate on the 6.
Blood Pressure Record chart in the back of the manual, indicating the
date and time of measurement.
IMPORTANT: Measure blood pressure at the same time each day.
SYSTOLIC
DIASTOLIC
PULSE