Filter
Top Products
EC Series EN-11
Sets the level in which the zero point
is stable; the higher the setting, the
more stable.
The following settings are available:
0, 1, 2, 3, 4, 5 (level)
5.5 Zero Return Range
Weight g
0..
Zero Return Range
Piece Weight g/pc
t.rAtE
Count pcs
------.
Internal Count
(disregard)
Default Setting
Sets the activation mode of the
backlight.
The following settings are available:
0 = Auto-on with items greater than
9d placed on the pan or any
key is pressed; turns off after 5
seconds of inactivity.
1 = Manual; press the decimal point
key [.] to switch the backlight
on or off.
5.6 Backlight
Weight g
0..
Backlight
Piece Weight g/pc
bL
Count pcs
------.
Internal Count
(disregard)
Default Setting
Sets the active weighing unit.
The following settings are available:
0 = Grams (g), 1 = Pounds (lb)
5.7 Unit Selection
Weight g
0..
Weighing Unit
Piece Weight g/pc
Unit
Count pcs
------.
Internal Count
(disregard)
Default Setting
Sets the APW re-computing mode.
Optimizes piece weight accuracy by
automatically re-computing the
existing APW as further pieces (less
than the original quantity on the pan)
are added (a beep will sound in this
event).
The following settings are available:
0 = Off, 1 = On
5.8 APW Re-computing
Weight g
0..
APW Re-averaging
Piece Weight g/pc
AV
Count pcs
------.
Internal Count
(disregard)
Default Setting
3 EC-textEN.pmd 8/9/2005, 1:41 PM11