Filter
Top Products
EC Series EN-9
4.7 Storing Piece Weight into Memory
There are 10 memory locations (0 to 9 numeric keys) available to store APW values.
After determining the piece weight
(refer to
Sec. 4.5 or 4.6
), long-press
APW for approx. 2 seconds. “StorE”
will flash on the display.
Press any one of the numeric keys
to store the piece weight data in this
selected location.
0.0.
0.0.
Weight g
0.0.
SS
SS
S
tt
tt
t
orEorE
orEorE
orE
40.0.
Piece Weight g/pc
40..
0..
0..
Count pcs
0..
Press the numeric key (ex. location 5)
with the stored piece weight data (ex.
40 g/pc), then press APW two times.
The stored data will be uploaded and
displayed.
4.8 Recalling Piece Weight from Memory
Place the item to be weighed/counted
on the pan (ex. 300g with APW of
60g). Press M+. “Add”, then the
accumulation event is displayed
momentarily before reverting to nor-
mal weighing mode.
NOTE: Weight display must return to
zero before the next accumulation
can register.
NOTE: Accumulation data is not retained when the unit is turned off.
NOTE: Stored APW values are retained when the unit is turned off.
4.9 Accumulation: Weight and Quantity
Accumulation is indicated by the annunciator.
0.0.
Weight g
0.0.
5..
Memory Location
Piece Weight g/pc
0..
0.0.
0.0.
0..
Count pcs
0..
0.0. 40.000 0..
To recall Total Accumulation data,
press M+ with no weight on the pan.
The data is displayed momentarily
before reverting to normal weighing
mode.
To clear the Total Accumulation data,
press C while the data is displayed.
------.
Weight g
300.0.
Add
Piece Weight g/pc
60.0000
------.
Count pcs
5..
Total Accumulation
Times
300.0. 60.000. 5..
Total Accumulated
Count
Total Accumulated
Weight
300.0. =01= 5..
1500.0. 60.000. 25. .
Weight g
1500.0.
Total Accumulation
Times
Piece Weight g/pc
=05=
Count pcs
25..
Total Accumulated
Count
Total Accumulated
Weight
3 EC-textEN.pmd 8/9/2005, 1:41 PM9