Filter
Top Products
36 www.pridemobility.com Litestream Junior
APPENDIX I - SPECIFICATIONS
LITESTREAM JUNIOR SPECIFICATIONS
Seat Dimensions: Width: 10-16 in.
Depth: 10-17 in.
Back Height: 12-24 in.
Drive Wheels:
Mags: 12 in (30.48 cm), 16 in. (40.64 cm), 18 in. (45.72 cm), 20 in. (50.8 cm), 22 in.
(55.88 cm), and 24 in. (60.96 cm)
Spoke: 20 in. (50.8 cm), 22 in. (55.88 cm), and 24 in. (60.96 cm)
Caster Wheels:
Solid: 3 in. (7.62 cm), 4 in. (10.16 cm), 5 in. (12.7 cm), 6 in. (15.24 cm), or 8 in. (20.32 cm)
Axle Mount: Quick-release
Caster Fork: Angle-adjustable, Bolt-on
Maximum Safe Slope: 5° (8.7%)
Turning Radius:
1
See figure 40.
Overall Size:
1
Length: See figure 40.
Width: See figure 40.
Weight Capacity:
4
125 lbs./56.7 kg/8 stone 12.6 lbs. with small frame
150 lbs./68 kg/10 stone 9.8 lbs. wtih medium frame
175 lbs./79.38 kg/12 stone 7 lbs. with large frame
Weights: 25 lbs. (11.34 kg) without front riggings
Armrests: Height-adjustable T-arm, Cantilever
Front Riggings: Swing-away leg rests, Elevating leg rests, Adjustable foot plates
Wheel Locks: Push-to-lock; Pull-to-lock
Accessories: Anti-tip wheels
Static Stability Forward
(Wheels Locked):
5
7.5°
Static Stability Rearward
(Wheels Locked):
5
8.5°
Wheel Lock Operational
Force:
2
Left: 60 N Right: 60 N
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or -) 3%.
2
Test results for Litestream Junior equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section
03. Maximum operating force for hand operated wheel locks is 60N (+ or -) 10%. Operational force can vary based on tire type,
manufacturer, and condition.
3
Pneumatic caster wheels are intended for indoor/outdoor use on smooth, level surfaces. They are not recommended for use on
rugged terrain as this may cause premature wear and more frequent replacement of the tire.
4
The weight capacity includes the weight of the user, seating system, and any accessories used on the wheelchair.
5
Test conducted in optimal configuration.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.