Filter
Top Products
Litestream Junior www.pridemobility.com 21
IV. COMFORT ADJUSTMENTS
To adjust the depth of the Litestream Junior:
1. Remove the depth adjustment screws that attach
the back cane to the side frame on both sides of the
wheelchair. See figure 15.
2. Position the back canes so that the desired depth is
achieved.
3. Reinstall the depth adjustment screws screws to
secure the back canes to the side frame on both
sides of the wheelchair.
Anti-tip Wheel Adjustment
If your wheelchair is set up in reverse configuration, it
will also be equipped with anti-tip wheels. Anti-tip
wheels are an integral and important safety feature of
your wheelchair. They are factory set to between 0.75-
2 in. (2-5 cm), but may require adjustment to accom-
modate depth adjustment and center of gravity.
PROHIBITED! Pride recommends not to
remove the anti-tip wheels or modify
the wheelchair in any way that is not
authorized by Pride.
WARNING! The anti-tip wheels should
only be adjusted by a Quantum Rehab
Provider or a qualified technician.
To adjust the anti-tip wheels:
1. Push the button on the anti-tip wheel and move the
anti-tip wheel up or down to unlock it.
See figure 16.
2. Adjust the anti-tip wheel to the desired position
while aligning the anti-tip wheel with the
adjustment hole.
3. Ensure that the button locks into place. You will
hear a click when the anti-tip wheel is locked into
place.
4. After installing or adjusting the anti-tip wheels,
push and pull on both anti-tip wheels to ensure they
are properly engaged.
5. Repeat for the other side.
Figure 15. Side Frame Depth Adjustment
DEPTH
ADJUSTMENT
SCREWS
Figure 16. Anti-tip Wheel Adjustment
BUTTON
LOCATION