Filter
Top Products
26 www.pridemobility.com Litestream Junior
IV. COMFORT ADJUSTMENTS
Drop-in Armrest Removal
The drop-in armrests can be removed to aid in trans-
fers or transporting your wheelchair.
To remove the armrest:
1. Squeeze the armrest latch. See figure 29.
2. Pull the armrest up.
3. Repeat for the other side if necessary.
WARNING! Use care when operating.
Possible pinch point created during
operation.
Drop-in Armrest Height Adjustment
You can adjust the drop-in armrest height to five posi-
tions in 1-in. (2.54-cm) increments.
To adjust the drop-in armrest:
1. Pull back the release lever located on the armrest.
See figure 30.
2. Move the armrest up or down.
3. Release the release lever.
4. Make sure the armrest latches into place.
5. Repeat for the other side if necessary.
Flip-up Armrest Height Adjustment
You can adjust both the latching and non-latching flip-
up armrest height to eight positions in 1-in. (2.54-cm)
increments.
To adjust the flip-up armrest height:
1. Remove the armrest height adjustment screws. See
figure 31.
2. Move the armrest up or down.
3. Reinstall the armrest height adjustment screws.
4. Repeat for the other side if necessary.
Figure 29. Drop-in Armrest Removal
ARMREST
LATCH
Figure 30. Drop-in Armrest Height Adjustment
RELEASE
LEVER
Figure 31. Flip-up Armrest Height Adjustment
ARMREST
HEIGHT
ADJUSTMENT
SCREWS