Filter
Top Products
36 www.pridemobility.com Litestream XF
APPENDIX I - SPECIFICATIONS
LITESTREAM XF SPECIFICATIONS (WITH DEPTH-ADJUSTABLE SIDE FRAME)
Seat Dimensions: Width: 14-21 in.
Depth: 14-20 in.; 3 in. (7.62 cm) of depth adjustment
Back Height: 16-24 in.
Seat and Seatback: Seat: Adjustable tension; Seatback: Synergy® Shape Back or similar back
Drive Wheels:
Mags: 20 in. (50.8 cm), 22 in. (55.88 cm), and 24 in. (60.96 cm)
Spoke: 20 in. (50.8 cm), 22 in. (55.88 cm), 24 in. (60.96 cm), 25 in. (63.5 cm), and 26 in.
(66.04 cm)
Caster Wheels:
Solid: 4 in. (10.16 cm), 5 in. (12.7 cm)
,
6 in. (15.24 cm), or 8 in. (20.32 cm)
Pneumatic:
6 in. (15.24 cm)
3
and 8 in. (20.32 cm)
Axle Mount: Quick-release
Caster Fork:
Angle-adjustable, Quick-release, Bolt-on, Frog Legs
TM
Maximum Safe Slope: 5° (8.7%)
Turning Radius:
1
See figure 48.
Overall Size:
1
Length: See figure 48.
Width: See figure 48.
Weight Capacity: 250 lbs./113.4 kg/18 stone
Weights: 29.5 lbs. (13.38 kg) without front riggings
Armrests: Latching flip-up; Non-latching flip-up; Height-adjustable T-arm
Front Riggings: Swing-away leg rests, Elevating leg rests, Adjustable foot plates
Wheel Locks: Push-to-lock; Pull-to-lock; Scissor-lock
Accessories: Anti-tip wheels
Static Stability Forward
(Wheels Locked):
7.5°
Static Stability Rearward
(Wheels Locked):
8.5°
Wheel Lock Operational
Force:
2
Left: 60 N Right: 60 N
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or - ) 3%.
2
Test results for Litestream XF equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03.
Maximum operating force for hand operated wheel locks is 60N (+ or - ) 10%. Operational force can vary based on tire type,
manufacture, and condition.
3
Pneumatic caster wheels are intended for indoor/outdoor use on smooth, level surfaces. They are not recommended for use on
rugged terrain as this may cause premature wear and more frequent replacement of the tire.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.