Filter
Top Products
Litestream XF www.pridemobility.com 35
APPENDIX I - SPECIFICATIONS
LITESTREAM XF SPECIFICATIONS (WITHOUT DEPTH-ADJUSTABLE SIDE FRAME)
Seat Dimensions: Width: 14-21 in.; 18-22 in. with HD option
Depth: 14-20 in.; 18-20 in. with HD option
Back Height: 15-19 in.; 12-16 in.; 15-19 in. with HD option
Seat and Seatback: Adjustable tension
Drive Wheels:
Mags: 20 in. (50.8 cm), 22 in. (55.88 cm), and 24 in. (60.96 cm)
Spoke: 20 in. (50.8 cm), 22 in. (55.88 cm), 24 in. (60.96 cm), 25 in. (63.5 cm), and 26 in.
(66.04 cm)
Tuff Wheel®: 24 in. (60.96 cm) (HD option only)
Sport Light Extreme: 24 in. (60.96 cm), 25 in. (63.5 cm), and 26 in. (66.04 cm)
Light Extreme: 22 in. (55.88 cm), 24 in. (60.96 cm), 25 in. (63.5 cm), and 26 in. (66.04 cm)
Caster Wheels: Solid: 4 in. (10.16 cm), 5 in. (12.7 cm)
,
6 in. (15.24 cm), or 8 in. (20.32 cm)
Pneumatic:
6 in. (15.24 cm)
3
and 8 in. (20.32 cm)
Axle Mount: Quick-release
Caster Fork:
Angle-adjustable, Quick-release, Bolt-on, Frog Legs
TM
Maximum Safe Slope: 5° (8.7%)
Turning Radius:
1
See figure 48.
Overall Size:
1
Length: See figure 48.
Width: See figure 48.
Weight Capacity: 250 lbs./113.4 kg/18 stone
350 lbs./158.7 kg/25 stone with HD option
Weights: 27.3 lbs. (12.38 kg) without front riggings
35.5 lbs. (16.1 kg) without front riggings (HD option)
Armrests: Desk-length (tubular); Height-adjustable T-arm, Dual-post
Front Riggings: Swing-away leg rests, Elevating leg rests, Adjustable foot plates
Wheel Locks: Push-to-lock; Pull-to-lock; Scissor-lock
Accessories: Anti-tip wheels
Static Stability Forward
(Wheels Locked):
7.5°
Static Stability Rearward
(Wheels Locked):
8.5°
Wheel Lock Operational
Force:
2
Left: 60 N Right: 60 N
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or - ) 3%.
2
Test results for Litestream XF equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03.
Maximum operating force for hand operated wheel locks is 60N (+ or - ) 10%. Operational force can vary based on tire type,
manufacture, and condition.
3
Pneumatic caster wheels are intended for indoor/outdoor use on smooth, level surfaces. They are not recommended for use on
rugged terrain as this may cause premature wear and more frequent replacement of the tire.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.