Filter
Top Products
18 www.pridemobility.com Litestream XF
Optional Caster Pin Lock
If your wheelchair is equipped with a caster pin lock,
you can lock the caster wheels in the forward position
to aid in transferring. The caster pin lock should be
engaged prior to transfer and disengaged prior to
operating the wheelchair.
To operate the caster pin lock:
1. Rotate the lever so that the securement pin is not
in the groove to engage the caster pin lock. See
figure 14.
2. Rotate the lever so that the securement pin is
securely in the groove to disengage the caster pin
lock. See figure 14.
Optional Transit Securement System
If your wheelchair is equipped with a transit
securement system, it is equipped with manufacturer-
installed front and rear securement brackets and
positioning belt anchoring brackets. See figure 13.
Refer to the Transit Securement System supplement
provided with your wheelchair for information on
how to use your transit securement system.
NOTE: The transit securement system is not
available on wheelchairs equipped with an HD
option.
WARNING! If your wheelchair is
equipped with a transit securement
system, the drive wheel height,
seatback height, and caster angle
should only be adjusted by a
Quantum Rehab Provider or a
qualified technician.
WARNING! Always use the
manufacturer-installed front and rear
securement brackets supplied with
the transit securement system. Do
not modify the transit system
securement brackets in any way. Do
not modify your wheelchair in any
way unless authorized by Pride.
Figure 13. Securement Brackets
REAR
SECUREMENT
BRACKETS
FRONT
SECUREMENT
BRACKET
III. YOUR WHEELCHAIR
Figure 12. Folding the Seatback Down
PULL STRAP
TO FOLD
SEATBACK
Figure 14. Caster Pin Lock Operation
POSITIONING
BELT ANCHORING
BRACKET
PIN IN
GROOVE
PIN NOT IN
GROOVE