Pride Mobility Wrangler Mobility Aid User Manual


 
28 Wrangler
X. BASIC TROUBLESHOOTING
Any electromechanical device occasionally requires some troubleshooting. However, most of the problems that
may arise can usually be solved with a bit of thought and common sense. Many of these problems occur because
the batteries are not fully charged or because the batteries are worn down and can no longer hold a charge.
PROBLEM POSSIBLE SOLUTIONS
All of my Wrangler systems appear to be dead. One of the following actions may eliminate the problem.
 Ensure the key is fully inserted in the key switch.
 Ensure the batteries are fully charged.
Push in the main circuit breaker reset button.
Ensure both battery harnesses are firmly connected to
the electronic controller module and to the battery
terminals.
Ensure the 9-pin connector is firmly attached.
My Wranglers battery condition meter shows a full Ensure your Wrangler was not left in freewheel mode.
charge, but my PMV does not move when I push (Pull up on the freewheel lever to restore normal
the throttle. operation.)
NOTE: When the freewheel lever is pushed down, your
Wranglers brakes are disengaged and all power to the
transaxle is cut.
My Wranglers main circuit breaker repeatedly trips. One of the following actions may eliminate the problem.
Charge your Wranglers batteries more frequently.
Have both of your Wranglers batteries load tested by
your authorized Pride Provider.
Obtain a battery load tester at most any automotive
parts store; follow the directions supplied with the
load tester.
My Wranglers battery condition meter dips way down One of the following actions may eliminate the problem.
and the motor surges or hesitates when I press the  Fully charge your Wranglers batteries.
throttle control lever. Have your authorized Pride Provider load test each battery.
 Obtain a battery load tester at most any automotive
parts store; follow the directions supplied with the
load tester.
If you experience any problems with your Wrangler that you are not able to resolve, immediately contact your
authorized Pride Provider for information, maintenance, and service.