Filter
Top Products
14 Wrangler
Key Switch
This switch enables you to power up (turn on) and power down (turn off) your Wrangler.
n Fully insert the key into the key switch to power up your Wrangler.
n Pull the key out to power down your Wrangler.
Tiller Adjustment Lever
This lever allows you to adjust the tiller between four different positions. For tiller adjustment instructions, see VIII.
Comfort Adjustments.
Throttle Control Levers
These levers allow you to control your Wranglers forward and reverse speed up to the maximum speed you
preset on the speed adjustment dial. For instructions on how to operate your Wranglers throttle control, see VII.
Operation.
Horn Button
This button activates a warning horn.
n Ensure the key is fully inserted into the key switch and push the horn button to sound the horn.
Battery Conditon Meter
When your Wranglers key is fully inserted, this meter indicates the approximate battery voltage strength. For
further information on battery charging, see VI. Batteries and Charging.
Speed Adjustment Dial
This dial allows you to select and limit your Wranglers speed up to the highest speed you set with the 5-10 mph
switch.
5-10 MPH Switch
This switch limits the top speed of your Wrangler to either 5 or 10 mph.
n Toggle this switch to either 5 or 10 mpg.
NOTE: When driving indoors, it is recommended you set the switch to 5 mph.
Light Switch
This switch turns your Wranglers headlight on and off.
n Toggle this switch to the right to turn the light on.
n Toggle this switch to the left to turn the light off.
V. DESCRIPTION
WARNING! If you remove the key from the key switch while your Wrangler is in motion,
the electronic brakes engage and your Wrangler comes to an abrupt stop!