Filter
Top Products
22 Wrangler
VII. OPERATION
PRE-RIDE ADJUSTMENTS AND CHECKS
n Have you fully charged the batteries? See VI. Batteries and Charging.
n Are the manual freewheel levers in the drive (up) mode? See V. Description. Never leave the freewheel
levers pushed down unless you are manually pushing your Wrangler.
n Is your proposed path clear of people, pets, and obstacles?
n Have you planned your route to avoid adverse terrain and as many inclines as possible?
n Are you positioned comfortably in the seat? See Getting On Your Wrangler, below.
n Is the seat at the proper height? See VIII. Comfort Adjustments.
n Is the seat locked securely in place? See VIII. Comfort Adjustments.
n Is the tiller handle at a comfortable setting and locked securely in place? See VIII. Comfort Adjustments.
n Is the key fully inserted into the key switch? See V. Description.
n Is the speed adjustment dial set to a slow setting? V. Description.
n Are you grasping the handgrips with a thumb resting on each of the throttle levers? See V. Description.
n Does your Wranglers horn work properly?
GETTING ONTO YOUR WRANGLER
1. Make certain that the key is removed from the key switch.
2. Stand at the side of your Wrangler.
3. Push down on the seat rotation lever to unlock the seat and rotate the seat until it faces you; release the seat
rotation lever to lock the seat securely in place.
4. Position yourself comfortably and securely in the seat.
5. Push down on the seat rotation lever and rotate the seat until you face forward; release the seat rotation lever
to lock the seat securely in place.
6. Make certain that your feet are safely on the floorboard.
OPERATING YOUR WRANGLER
After planning your route:
n Set the 5-10 mph switch to your desired maximum speed of 5 or 10 mph; then set the speed adjustment dial
to your desired speed. We recommend you initially set the 5-10 mph switch to 5 mph and the speed adjust-
ment dial to the tortoise (slowest speed setting).
n Insert the key into the key switch.
n With your hands on the handgrips, use your thumb to gently push the right throttle lever to disengage your
Wranglers brakes and move forward; the electric brake automatically disengages and the Wrangler acceler-
ates smoothly to the speed you set with the speed adjustment dial.
n Pull on the left handgrip to steer your Wrangler to the left.
Pull on the right handgrip to steer your Wrangler to the right.
n Move the tiller to the center position to drive straight ahead.
n Gently release the throttle lever to decelerate and come to a complete stop. The electric brake automatically
engages when your Wrangler comes to a stop.
n To move in reverse, use your thumb to gently push the left throttle lever to disengage your Wranglers brakes
and move rearward.
NOTE: Your Wranglers reverse speed is slower than the speed you set with the speed adjustment dial and
the 5-10 mph switch.