Filter
Top Products
24 Wrangler
VIII. COMFORT ADJUSTMENTS
TILLER ANGLE ADJUSTMENT
You can adjust the tiller angle to four different locking positions.
1. Pull up on the tiller adjustment lever. See figure 10.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller will remain in
that position.
NOTE: In order to lower the tiller to its lowest position,
you must first remove the seat and both batteries.
SEAT HEIGHT ADJUSTMENT
Your Wranglers seat can be repositioned to one of three different
heights.
1. Remove the seat from your Wrangler. See figure 11.
2. Use the attached ring to pull and remove the ball detent pin
from the lower seat post. See figure 12.
3. Raise or lower the upper seat post to the desired seat height.
4. While holding the upper seat post at that height, match up the
holes in the upper seat post and the lower seat post.
5. Fully insert the ball detent pin.
6. Replace the seat.
FIGURE 10. TILLER ADJUSTMENT LEVER
UPPER SEAT
POST
LOCATING HOLES
FIGURE 11. SEAT REMOVAL FIGURE 12. SEAT HEIGHT ADJUSTMENT
LOWER SEAT
POST
BALL DETENT
PIN
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the PMV is in motion.