Filter
Top Products
SL6 Lift Chair www.pridemobility.com 21
SL6 LIFT CHAIR
Your Pride Lift Chair will require routine maintenance checks. You can perform some of these
checks, but others may require assistance from an authorized Pride Provider. By following the
maintenance checks in this section as scheduled, you can help ensure your lift chair gives you
years of trouble-free operation. If you have any questions regarding your lift chair’s care, contact
your authorized Pride Provider.
FABRIC CARE
! Inspect the fabric on a regular basis for any pulls, tears, or gaps.
! Your lift chair fabric is made of 100% polyester and falls under cleaning code W. Frequent vacuuming and
light brushing to remove dust and grime is the recommended cleaning method for your lift chair. If spot
cleaning is required, you should use the foam from water-based cleaning agents such as mild detergent or
non-solvent upholstery shampoo. Apply the foam with a soft brush in a circular motion and vacuum when
dry. Pretest a small area of the fabric with the cleaning agent before using this method. If your lift chair
fabric is in an overall soiled condition, use a professional furniture cleaning service.
WARNING! Fabric should not be allowed to come in direct contact with any type of heat
source, e.g., a space heater or cigarette. Personal injury or fire damage may occur.
WARNING! Pride strongly recommends that you do not smoke cigarettes while seated
in or using your lift chair, although the lift chair has passed the necessary testing
requirements for cigarette smoking. You must adhere to the following safety
guidelines if you decide to smoke cigarettes while seated in or using your lift chair.
" Do not leave lit cigarettes unattended.
" Keep ashtrays a safe distance from the lift chair.
" Always make sure cigarettes are completely extinguished before disposal.
NOTE: Do not use solvent-type cleaners to spot clean. Do not saturate the fabric. Prevent damage
to the fabric; do not expose the lift chair to direct sunlight.
ELECTRONICS CARE
! Inspect all wiring harnesses to make sure they are not damaged or frayed.
! If damage is present, unplug the lift chair and contact your authorized Pride Provider for service.
! Keep all electronics free from moisture and temperature extremes. Pride Lift Chairs are intended for
indoor use only!
WARNING! Even though the lift chair has passed the necessary testing requirements
for ingress of liquids, you should keep electrical connections away from sources of
dampness, including direct exposure to water or bodily fluids and incontinence. Check
electrical components frequently for signs of corrosion and replace as necessary.
WARNING! Prevent the risk of electrical shock. Ensure that any wires leading from
the external transformer to the electrical outlet are kept clear of lift chair pinch
points and mechanical linkages.
DISPOSAL AND RECYCLING
Your lift chair must be disposed of according to applicable local and national statutory regulations. Contact
your local waste disposal agency or authorized Pride Provider for information on proper disposal of lift chair
packaging, metal frame components, fabric, electronic components, and batteries.
WARNING! Plastic bags are a suffocation hazard. Dispose of plastic bags properly
and do not allow children to play with them.
VII. CARE AND MAINTENANCEVII. CARE AND MAINTENANCE
VII. CARE AND MAINTENANCEVII. CARE AND MAINTENANCE
VII. CARE AND MAINTENANCE