Filter
Top Products
10 www.pridemobility.com SL6 Lift Chair
SL6 LIFT CHAIR
III. YOUR LIFT CHAIRIII. YOUR LIFT CHAIR
III. YOUR LIFT CHAIRIII. YOUR LIFT CHAIR
III. YOUR LIFT CHAIR
Lift Mechanism: Responds to the hand control commands to position the chair in the sit, recline, and stand
positions.
Leg Levelers: Manually rotate up or down in order to stabilize the chair before use (Fig. 3.2).
Figure 3.2 Leg Levelers
Scissor Mechanisms: Extend or retract to take the
chair through the various stages of recline (Fig. 3.3).
WARNING! Be aware that the
scissor mechanisms are a pinch
point on the lift chair. Keep
appendages and objects clear of
these points when operating the
footrest.
ELECTRICAL COMPONENTS
Your Pride Lift Chair is equipped with a low voltage DC
motor system that reduces the standard household
alternating current of 90V AC - 264V AC to direct cur-
rent (24/39V DC). The electrical components include
the external transformer, batteries, and hand control.
Keep these areas free from moisture at all times.
Figure 3.3 Scissor Mechanism
ROTATE THE LEG LEVELERS TO RAISE OR LOWER THE CHAIR.
SCISSOR
MECHANISM
(PINCH POINT)
External Transformer: Connects to a standard electrical outlet to provide power to the lift chair. The trans-
former is equipped with an LED indicator, which shows green when power to the transformer is on.
The external transformer may also come equipped with mounting brackets that allow the transformer to be
mounted to the wall directly under the standard electrical outlet. The screws must be mounted to the wall stud
for security. Refer to “Appendix C” for a mounting diagram.
NOTE: Pride is not responsible for damage due to improper installation.
Batteries: Provide the power needed to return the lift chair from the recline position to the sit and/or lift position
in the event of a power failure. For those models equipped with a battery backup system, the batteries are
located inside the external transformer.
Hand Control: Contains the controls needed to operate the various functions of the lift chair. Refer to V.
“Operation” for more information. The hand control may be equipped with a quick-release connector, which
enables the user to detach the hand control from the chair, disabling all functions of the hand control.
WARNING! Keep all electrical components free from moisture at all times to prevent
shock and/or electrical hazard.