Filter
Top Products
12 www.pridemobility.com SL6 Lift Chair
SL6 LIFT CHAIR
IVIV
IVIV
IV
. ASSEMBL. ASSEMBL
. ASSEMBL. ASSEMBL
. ASSEMBL
Y/DISASSEMBLY/DISASSEMBL
Y/DISASSEMBLY/DISASSEMBL
Y/DISASSEMBL
YY
YY
Y
NOTE: Depending on chair width, you may need to slide on one side of the chair-back at a time. If
this is the case, level the chair-back before pressing down to lock into position.
4.1.3. Push firmly on the top of the chair-back to lock
into position. Listen for a click on each side to
ensure the chair-back is locked in properly.
NOTE: Pull up on the chair-back to ensure that
it is locked in place. If the back can be pulled
off, then repeat steps 4.1.1 through 4.1.3.
4.1.4 Tuck the fabric flaps on the front of the chair-
back and rear of the chair base down into the
frame and secure with the reusable faster on
each flap. Then, zip the two sections together.
“CLICK”
4.1.5 Attach the chair-back to the hook and loop
flaps on the bottom of the chair base.