Filter
Top Products
30
www.pridemobility.com
Revo
VI. COMFORT ADJUSTMENTS
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with an adjustable pivoting tiller.
1. While supporting the tiller, turn the tiller adjustment knob
counterclockwise to loosen the tiller. See figure 10.
2. Move the tiller to a comfortable position.
3. Turn the tiller angle adjustment knob clockwise to secure the
tiller in position.
NOTE: In order to fully lower the tiller, you must first
completely remove the seat and both battery packs. See VII.
“Disassembly and Assembly.”
SEAT ROTATION ADJUSTMENT
The seat rotation lever secures the seat in one of four posi-
tions.
1. Pull up on the seat rotation lever to disengage the seat. See
figure 11.
2. Rotate the seat to the desired position.
3. Release the seat rotation lever to secure the seat in place.
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs at the back of the seat
frame. See figure 11.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs.
NOTE: Pivot the armrests upward to aid in getting onto and
off of your scooter.
WARNING! Remove the key from the key switch
before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the
scooter is in motion.
Figure 10. Tiller Angle Adjustment Knob
Figure 11. Seat Adjustments
ARMREST ADJUSTMENT KNOBS
SEAT ROTATION LEVER
TILLER ANGLE
ADJUSTMENT
KNOB
BOLTS
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or rearward to one of three settings to adjust the distance between
the seat and the tiller.
1. Remove the seat from your scooter. Refer to VII. “Disassembly and Assembly.”
2. Remove the four bolts that fasten the seat to the seat platform. See figure 11.
3. Align the seat platform with the desired set of holes on the seat.
4. Replace and tighten the four bolts securely.