Filter
Top Products
20
www.pridemobility.com
Revo
III. YOUR SCOOTER
Horn Buttons
These buttons activate a warning horn. Your scooter must be turned on for the horn to be operational. Do not
hesitate to use the warning horn when doing so may prevent accident or injury.
Status LED
The status LED will alert you to electrical problems that may occur with the scooter. The LED remains constantly
lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See
VIII. “Basic Troubleshooting” for flash codes.
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see IV. “Batteries and Charging.”
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
! The image of the tortoise represents the slowest speed setting.
! The image of the hare represents the fastest speed setting.
REAR SECTION
The manual freewheel lever, anti-tip wheels, battery packs, main circuit breaker (reset button), and the motor/
transaxle assembly (not shown) are located on the rear section of your scooter. See figure 5.
Figure 5. Rear Section
RIGHT BATTERY PACK
MANUAL FREEWHEEL
LEVER
CHARGER POWER CORD
RECEPTACLE
LEFT BATTERY PACK
MAIN CIRCUIT BREAKER
(RESET BUTTON)
ANTI-TIP WHEELS