Filter
Top Products
18 www.pridemobility.com Sundancer
V. YOUR SCOOTER
Speed Adjustment Dial
This dial allows you to preselect and limit your scooterss top speed.
n The image of the tortoise represents the slowest speed setting.
n The image of the hare represents the fastest speed setting.
Running Lights Switch
This switch controls your scooters front and rear running lights.
n Toggle the switch forward to turn on your scooters running lights.
n Toggle the switch back to turn off your scooters running lights.
Power Seat Switch
This switch, when toggled on, enables you to raise or lower the power seat using the throttle control lever.
Horn Buttons
The scooter must be turned on for the horn to be operational.
n These buttons activate a warning horn.
n Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
n Toggle the switch forward to turn on the flashers.
n Toggle the switch back to turn off the flashers.
Turn Signal Buttons
n Press the appropriate turn signal button once to activate it.
n Your scooters turn signals are timed to shut off automatically.
Status LED
The status LED will alert you to electrical problems that may occur with the scooter. The LED remains constantly
lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See X.
Basic Troubleshooting. If the status LED flashes a code other than a code listed in Basic Troubleshooting,
contact the Pride Technical Service Department by calling 1-800-800-8586.
5-Amp Fuse
The fuse helps protect your scooters lighting and tiller console systems from receiving an overload of electrical
current. The fuse used in your scooter is the same type used in automobiles. See XI. Care and Maintenance for
fuse replacement.