Filter
Top Products
31Hurricane www.pridemobility.com
VII. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the PMV into seven pieces: the seat, the front section, the rear section, the rear shroud,
the basket, and the batteries. See figure 16. No tools are required to disassemble or assemble your PMV.
Since the disassembled sections of the PMV take up more floor space than the assembled unit, place the PMV
on a level, dry surface with sufficient room to move the parts around. You will need about 5 feet (1.5 meters)
in all directions. Keep in mind that you may need assistance to lift some of the PMV components.
1. Place the manual freewheel lever in the drive posi-
tion.
2. Lift the seat up and off the PMV.
3. Gently pull the shroud up and off of the rear section
of the PMV.
4. Disconnect the battery strap.
5. Unplug both T-handle battery harnesses. See figure 17.
6. Remove the batteries.
7. Unplug the front-to-rear harness. See figure 17.
WARNING! Failure to unplug both T-
handle battery harnesses and the front-
to-rear harness prior to separating the
front and rear sections could result in
permanent damage to the PMV.
WARNING! Avoid lifting weight beyond your physical capability. Ask for assistance when
necessary while disassembling or assembling your PMV.
SEAT
REAR SHROUD
REAR SECTION
BATTERIES
BASKET
FRONT SECTION
Figure 16. The Hurricane Disassembled
Figure 17. Harness Connections
FRONT-TO-REAR HARNESS
T-HANDLE BATTERY HARNESS
T-HANDLE BATTERY HARNESS