Filter
Top Products
17Hurricane www.pridemobility.com
400/181
TURN SIGNAL BUTTON
III. YOUR PMV
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your PMV, including the speed adjustment
dial, half/full speed switch, throttle control lever, battery condition meter, lights switch, hazard lights
switch, turn signal buttons, status LED, and horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your PMV until the
tiller console has dried thoroughly.
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your PMV, this meter indicates the
approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and
Charging.”
Turn Signal Buttons
Press the appropriate turn signal button once to activate it.
Your PMV’s turn signals are timed to shut off automatically.
Hazard Lights Switch
This switch activates the 4-way flashers on your PMV.
Toggle the switch forward to turn on the flashers.
Toggle the switch rearward to turn off the flashers.
Horn Button
These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational.
Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Figure 5. Tiller Console
HAZARD LIGHTS SWITCH
HORN BUTTON
KEY SWITCH
LIGHTS SWITCH
HORN BUTTON
SPEED ADJUSTMENT DIAL
THROTTLE CONTROL LEVER
BATTERY CONDITION METER
POWER SEAT SWITCH
(OPTIONAL)
STATUS LED
HALF/FULL SPEED SWITCH
TURN SIGNAL BUTTON