Filter
Top Products
44 Jazzy 1120
2000
X. CARE AND MAINTENANCE
MOTOR BRUSHES
The electric motors that power your Jazzy use carbon brushes.
These brushes may become susceptible to wear over a long pe-
riod of time. The motor brushes are the two contacts located
inside the motor assembly that supply power to the motor. They
are designed to provide several thousand hours of operation.
However, if the brushes become dirty with carbon deposits or
wear out, the motor will run poorly or not at all. We recommend
that your authorized Pride provider inspect the brushes every six
months or sooner if your Jazzy runs poorly. If inspection deter-
mines excessive wear on the brushes, they must be replaced or
motor damage will result.
Figure 49. Motor
MOTOR BRUSH CAP
NOTE
:
Failure to maintain the brushes could void your Jazzys warranty.
To inspect or replace the motor brushes:
1. Remove the seat, body shroud, and batteries. See VII. Disassembly.
2. Unscrew the motor brush caps. See figure 49.
3. Remove the brushes.
4. Inspect for wear. inspect for wear.
5. Replace brushes, if necessary. Contact your authorized Pride provider for replacement brushes.
CORRECTIVE MAINTENANCE
If the battery indicator gauge does not light up when you turn on the power:
n Check the harness connections. Make sure they are tight.
n Check the circuit breaker. Reset it if necessary.
n Check the battery connections.
If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are
available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that
come with the load tester. If either one of the batteries fails the load test, replace both of them. If your Jazzy still
does not power up, contact your authorized Pride provider.
WHEN TO SEE YOUR PRIDE PROVIDER FOR SERVICE
The following symptoms could indicate a serious problem with your Jazzy. If necessary, contact your authorized Pride
provider. When calling, have the model number, serial number, nature of the problem, and the trouble code if available.
n Motor noise
n Frayed harnesses
n Cracked or broken connectors
n Uneven wear on any of the tires
n Jerky motion
n Pulling to one side
n Bent or broken wheel assemblies
n Does not power up
n Powers up, but does not move