Filter
Top Products
Jazzy 1104 Rev F/Feb03 www.pridemobility.com 39
X. CARE AND MAINTENANCE
5. Remove the old tube and/or tire and replace it with a new tube and/or tire.
6. Reassemble the wheel.
7. Slide the wheel back onto the shaft.
8. Install the drive wheel bolt into the center hub and tighten.
9. Inflate the tire to 30 35 psi.
BATTERY REPLACEMENT
A diagram is printed on a decal on the Jazzy 1104 frame near the battery tray.
To replace the batteries:
1. Turn the power off.
2. Unplug the controller wire harness.
3. Remove the seat.
4. Remove the body shroud.
5. Loosen the wing nuts on the positive (red) battery terminals first.
6. Remove the wires.
7. Loosen the wing nuts on the negative (black) battery terminals.
8. Remove the wires.
9. Replace the batteries.
10. Install the batteries into your Jazzy 1104 with the terminal sides of the batteries facing inward, toward
each other.
11. Connect the wire marked (+) to the closest positive (red) battery terminal.
12. Connect the wire marked (-) to the closest negative (black) battery terminal on the other battery.
13. Connect one circuit breaker harness to the empty positive terminal of one battery, and connect the other
circuit breaker harness to the empty negative terminal of the other battery.
WARNING! Battery posts, terminals, and related accessories contain lead and lead com-
pounds. Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! Make sure you tighten the fasteners so that the connections are secure.