Filter
Top Products
34 www.pridemobility.com Jazzy 1104 Rev F/Feb03
IX. BATTERIES AND CHARGING
n Maintain 3035 psi in pneumatic drive wheels.
n Plan your trip in advance to avoid inclines if possible.
n Limit baggage weight to essential items.
n Try to maintain an even speed and avoid stop-and-go driving.
What type of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance.
Use these specifications to reorder deep-cycle batteries:
snoitacificepSyrettaB
:epyTlleCleGroMGAelcyc-peeD
:eziS42puorG
:egatloVhcaestlov21
:egarepmAsruohpma08-07
:eziSylnonoitpotaesrewop(22-FN
:egatloVhcaestlov21
:egarepmAsruohpma55-54
Why do my new batteries seem weak?
Deep-cycle batteries employ a much different chemical technology than that used in car batteries, nickel-
cadmium (nicads), or in other common battery types. Deep-cycle batteries are specifically designed to
provide power, drain down their charge, and then accept a relatively quick recharge. Lead acid batteries
should be charged as often as possible. They do not have a memory like nickel cadmium batteries.
We work closely with our battery manufacturer to provide a battery that best suits your Jazzy 1104s spe-
cific demands. Fresh batteries arrive regularly at Pride and are promptly shipped with a full charge. During
shipping, the batteries encounter temperature extremes that may influence initial performance. Heat robs
the charge from the battery, and cold slows the power available and extends the time needed to recharge the
battery (just as with a car battery).
It might take a few days for the temperature of the battery to stabilize and adjust to its new ambient tem-
perature. More importantly, it takes a few charging cycles (a partial drainthen a full recharge) to estab-
lish the critical chemical balance that is essential to the batterys peak performance and long life. It is well
worth it to take the time to break in your battery properly.
WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell batter-
ies to reduce the risk of leakage or explosive conditions.