Filter
Top Products
6-38
3. To remove the bulb, pull it out of the assembly.
4. Push in a new bulb.
5. Reverse Steps 1 and 2 to reinstall the
taillamp assembly.
Back-Up Lamps
If you have a four-door sedan, do the following to
replace a back
-up lamp:
1. Use a TORX screwdriver to unscrew the back-up
lamp assembly from the fascia.
2. Gently pull the bulb assembly from the fascia.
3. Remove the bulb from the socket by turning it
one
-quarter turn counterclockwise.
4. Replace the bulb and reinstall the bulb assembly by
reversing Steps 1 and 2.
Dome Lamp with Integral Reading Lamps
To replace a bulb, do the following:
1. Insert a screwdriver blade into the slot at the rear of
the lens.
2. With the screwdriver, push the tab rearward to
release the lamp lens.
3. Push the lens forward to release the two tabs at the
front of the lens.
4. Gently remove and replace the bulb(s).
5. Reverse Steps 1 through 3 to reinstall the lens.