Filter
Top Products
6-9
Then go to the front of the vehicle and lift up on the
secondary hood release lever. The secondary hood
release lever is located near the front center of the
hood toward the driver’s side.
To make sure that the secondary hood release handle
works properly, lubricate the hood latch at least once
a year.
Lift the hood, release the
hood prop from its retainer
and put the hood prop into
the slot in the hood marked
“PROP ROD.” Use the prop
rod sleeve when handling
the prop rod.
Before closing the hood, be sure all the filler caps are
on properly. Then lift the hood to relieve pressure on the
hood prop. Remove the hood prop from the slot in the
hood and return the prop to its retainer. Lower the hood
8 to 10 inches (20 to 25 cm) above the vehicle and
release it to latch fully. Check to make sure the hood
is closed and repeat the process if necessary.