Filter
Top Products
8
Cabinet
Impact Resistant flame-retardant plastic cabinet
Regulatory Listing
CSA 601 / UL 2601/ IEC/EN-60601-1
Change in Max. Flow with
7 kpa Back Pressure
0.3 LPM
Recommended Storage and
Shipping Temperature
Dry (Up to 95% non-condensing), well ventilated area -20 ~ 60
(1). Conditions may vary based on altitude above sea level, barometric pressure and
temperature. Specification subjects to change without notice.
(2). This product complies with the following standards: C22.2 No 601.1-M90,
UL Std. No 2601-1 and IEC/EN 60601-1-1.
(3). For electromagnetic compatibility the standards are based as follow: CSA 601.1-2
and IEC/EN 60601-1-2.
(4). Protection against electric shock is classified as Type II.
(5). Degree of protection against electric shock is classified as Type BF.
(6). Mode of operation belongs to continuous mode.
(7). Equipment not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide
(8). Degree of protection against ingress of water is rated as IPX0.