Filter
Top Products
2 Place the handle in the plugged-in charger.
3 To deactivate the Easy-start feature, press and hold the on/off button
for 5 seconds. You hear 1 beep to indicate that the Easy-start feature
has been deactivated.
4 To activate the Easy-start feature, press and hold the on/off button
for 5 seconds. You hear 2 beeps to indicate that the Easy-start
feature has been activated.
Use of the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of the Sonicare toothbrush
in removing plaque.
Make sure the Easy-start feature is deactivated and the handle fully
charged when the Sonicare is used in clinical trials.
Smartimer
The Smartimer automatically sets the brushing time to the 2 minutes
that dentists and dental hygienists recommend.
After 2 minutes, the Smartimer automatically switches off the
toothbrush.
Ifyouwanttostopbrushingbrieyduringa2-minutebrushingcycle,
press the on/off button. When you press the on/off button again,
the Smartimer resumes the brushing cycle at the point where you
stopped.
The Smartimer automatically resets to the beginning of a 2-minute
cycle if:
you stop brushing for 30 seconds or longer;
you put the handle in the charger.
Quadpacer \
The Quadpacer 30-second interval timer ensures that you brush
all sections of your mouth evenly and thoroughly. At 30, 60 and 90
seconds, you hear a short beep and notice a pause in brushing action.
These signals tell you to continue with the next section of your
mouth.
When the battery is running low, you hear 5 beeps after the 2-
minute brushing cycle and the charging light blinks rapidly.
When you hear the low charge indication, there are 3 or fewer 2-minute
brushings left.
,
,
,
,
-
-
,
,
1
2
4
3
1
2
4
3
ENGLISH8