Filter
Top Products
ENGLISH 31ENGLISH30
C 7 If the shaving unit becomes detached from
the razor, you can easily reattach it.
8 You may also clean the hair chamber
without water by using the supplied brush.
After Each Use: Trimmer
1 Turn razor OFF.
2 Push down spring-release trimmer switch.
C 3 Clean trimmer with the brush every time
you use it.
C 4 Lubricate the trimmer teeth with Philips
Norelco Razor Lubricant (model AL80) or
with one drop of mineral oil every 6
months.
5 Close trimmer by pressing trimmer down.
This r
azor and Jet Clean System have no other
user-ser
viceable parts.
Any other service should
be perfor
med by the Philips Norelco Service
Location.
◗ Do not immerse razor in water.
C ◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
1 Always turn razor OFF,unplug from outlet
and remove cord from razor before
cleaning.
C 2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C 3 Clean inside razor heads and hair chamber
by running under hot water.
C 4 Clean outside of Razor Head Assembly by
running under hot water.
5 Close the Razor Head Assembly and shake
off excess water.
C 6 Open Razor Head assembly again and
leave open to air dry.
NO
TE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.