Filter
Top Products
ENGLISH 19ENGLISH18
2 First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours. After initial charge, recharging
requires 1hour. A fully charged razor has a
cordless shaving time of up to 30 days.
C ◗ When batteries are fully charged, the word
“Full” scrolls across the display.After a few
hours the word “FULL” stops appearing and
the display shows the remaining shaving time
in minutes along with the plug symbol.
Charging Razor with Jet Clean
System
C 1 Connect the small plug to the
Jet Clean
System
. Connect the charging pluginto any
100V to 240VAC outlet. Use only the
charging plug provided.
The razor holder automatically moves up to the
highest position.
C 2 Removeprotective razorhead cap from
razor.
C 3 Place the razor head side down in the razor
holder so that the razor head fits into the
configuration shown inside the
Jet Clean
System
. Gently press the base of the razor
towards the back of the
Jet Clean System
so that the razor base fits snugly in place.
Lock the razor into place by pushing the
lever down completely.The lever will not
lock down unless the razor has been
properly placed in the holder. Do not force
lever.
C ◗ The charging light blinks to indicate the razor is
being automatically (re)charged and will light up
continuously when fully charged.
4 First time charging and recharging after
non-use for 1 month or more requires a full
4 hours. After initial charge, recharging
requires 1 hour. A fully charged razor has a
cordless shaving time of up to 30 days.
When batteries are fully charged, the charging light
on the
Jet Clean System
will light up continuously.
◗ You may store your razor in the
Jet Clean
System
. Unplug from outlet when
charging/cleaning is complete.
C 5 Raise the lever holding the razor to the
highest position (1) and carefully remove
razor from the
Jet Clean System
(2).
When razor is removed from the
Jet Clean
System
, the charging light will turn off.