Filter
Top Products
ENGLISH 15ENGLISH14
Charging Razor with Jet Clean
System
C 1 Connect the small plug to the Jet Clean
System. Connect thecharging plugintoany
100Vto240VAC outlet. Useonlythe
chargingplugprovided.
The razor holder automatically moves up to the
highest position.
C 2 Removeprotectiverazor headcapfrom
razor.
C 3 Place the razor head side down in the razor
holder so that the razor head fits into the
configuration shown inside the Jet Clean
System.Gently press the base of the razor
towards the back of the Jet Clean System
so that the razor base fits snugly in place.
Lock the razor into place by pushing the
lever down completely.The lever will not
lock down unless the razor has been
properly placed in the holder.Do not force
lever.
C ◗ The charging light blinks to indicate the razor is
being automatically (re)charged and will light up
continuously when fully charged.
Charging Razor with a Cord
C 1 Connect cord directly to razor and
connect the charging plug into any 100V to
240V AC outlet. Use only the charging plug
provided.
◗ An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
C ◗ As you charge razor,the bottom light on the
display blinks red.After a few minutes,it will
turn green and blink.As charging continues,
more and more lights of the display meter will
briefly blink green and light up to indicate
what level of the batteries have been charged.
2 First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours. After initial charge,recharging
requires1hour. A fully charged razor has a
cordless shaving time of up to 17 days.
◗ When batteries are fully charged,all the
‘lights’ in the display will light up green. A few
hours after charging,all lights go out.