Filter
Top Products
ENGLISH 29ENGLISH28
Razor head check indication
C ◗ The replacement head indicator light starts
blinking to remind you to check if it’s time to
replace your razor heads to obtain optimal
shaving results.
Maintenance
◗ Always remove razor from the Jet Clean
System before cleaning appliance.
◗ Unplug the Jet Clean System.The Jet Clean
System may be wiped clean using a damp cloth.
completely with warm water from the tap.
◗ Water from the tap should be on a warm
setting to clean all washable parts.
Note;
DO NOT place or clean any parts of the
Jet Clean System in a dishwasher.
C 2 Simultaneously press the buttons located on
both sides of the Jet Clean System(1) and lift
the appliance off the JetClean canister(2).
Always remove appliance from canister by lifting
straight up. Do not tilt Jet Clean System.
C 3 Discard any remaining cleaning solution in
the canister.
The cleaning solution can be safely poured down
the sink as there are no harmful ingredients.
C 4 Simply rinse the canister with warm water.
Wipe the canister with a towel or tissue
to remove excess water.
C 5 Carefully lower the Jet Clean System over
the canister making sure the release
buttons snap back into position.
Replacing the Razor Heads
◗ Replace the razor heads once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model HQ9 Philips Norelco razor heads only.