Filter
Top Products
ENGLISH 21
◗ Use this appliance for its intended household
use as described in this manual.
1 PlacetheJet Clean Systemon aflat,level
surface.
C 2 Simultaneously press the buttons located
on both sides of the Jet Clean System (1)
and lift the appliance off the Jet Clean
canister (2).
Always remove appliance from canister by lifting
straight up. Do not tilt Jet Clean System.
3 Unscrew thelid onthe JetCleanSolution
bottle(ModelHQ200) providedwiththe
razor. Removetheairtightsealbylifting up
thetabson theseal. Replacelid onthe bottle
makingsurethelid isscrewedon securely.
C 4 Openlidand pourtheJetCleanSolutioninto
thecanister up to the MAX indication
located inside the canister.
NO
TE:
ONL
YUSE PHILIPS NORELCO JET
CLEAN
SOLUTION(MODEL
HQ200)WITH
THE
JETCLEAN
SYSTEM. ANYOTHER
SOLUTION
MAY
CAUSEDAMAGE TO YOUR
RAZOR.
ENGLISH20
C 1 The light above faucet symbol will start
blinking after each shave to remind you
that the razor needs to be cleaned (except
when the bottom light burns red).
Preparing Jet Clean System For Use
Important
◗ Onlyusethe razor,powerplug,Jet Clean System
andHQ200 cleaningsolution providedto
chargeorclean razor.
◗ Only use a Philips Norelco ‘XLCC’ model
razor with the Jet Clean System.
◗ OtherPhilips Norelco‘X’,‘XL’or‘LC’model
razors DO
NOTworkwitha Jet Clean System.
◗ Empty the cleaning solution canister and
thoroughly rinse the canister clean with warm
water every 2 weeks.
◗ The Jet Clean System thoroughly cleans but
does not disinfect your razor, therefore,do not
share razor with others.
◗ Thecharging plugconverts100-240VACto
lessthan24V DC.
◗ Placethe Jet Clean Systemona flat,stable
surfacetoavoidanyleakage. Be careful nottotip
ormovetheJet Clean Systemifitis filledwith
the cleaning solution.
◗ To avoid evaporation,do not expose cleaning
solution to direct sunlight.
◗ Remove the protective razor head cap from
the razor before charging or cleaning the razor
in the Jet Clean System.