Easy-start
This Sonicare comes with the Easy-start feature activated.
The Easy-start feature gently increases power over the rst 14
brushings to help you get used to brushing with the Sonicare.
Note: Each of the rst 14 brushings must last at least 1 minute to move
through the Easy-start ramp-up cycle properly.
Note: When the Clean and White mode is selected, the Easy-start feature is
inactive.
Deactivating or activating the Easy-start feature
1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger.
To deactivate Easy-start:
Press and hold the on/off button for 2 seconds. You hear 1 beep to indicate
that the Easy-start feature has been deactivated.
To activate Easy-start:
Press and hold the on/off button for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been activated.
Note: Use of the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of the Sonicare toothbrush in
removing plaque.
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically switching off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2 minutes twice a
day.
If you want to pause or stop brushing during the 2-minute brushing cycle,
press and hold the on/off button for 2 seconds. Press the on/off button
again and the Smartimer picks up where you left off.
The Smartimer automatically resets to the beginning of a 2-minute cycle if:
you stop brushing for 30 seconds or longer.
you put the handle in the charger.
The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth evenly and
thoroughly.
When you use the two-minute Clean or Sensitive mode, you hear a
short beep and a pause in brushing action at 30, 60 and 90 seconds.
-
-
-
-
-
-
-
-
1
2
4
3
1
2
4
3
ENGLISH8