25Philips Lifeline 6900/6800/AT Series User’s Manual
Personal Help Button
To attach:
1. Move the POWER switch on the back
of the Lifeline Communicator to the
OFF position before attaching the
wrist strap.
2. Remove the watch pins at each end of
the button by inserting a small paper
clip or similar tool into the holes
located on both outside edges.
3. Position the wrist strap over the back
of the button.
4. Insert the watch pins over the wrist
strap into the pin holes.
5. Be sure to move the POWER
switch on the back of the Lifeline
Communicator to the ON position.
To adjust:
1. Lift the fastener to loosen the wrist
strap.
2. Adjust the wrist strap to the desired
length and close the fastener. The
wrist strap will slide easily on and off
the wrist, with no further adjustment
needed.
Using the Wrist Strap
Call Philips Lifeline if you prefer a wrist strap and need one sent
to you.