Filter
Top Products
8 C1667M (6/06)
USING A WALL CLIP
To attach the TW3004AR receiver to a wall using the supplied wall clip, refer to Figure 2 and do the
following:
1. Attach the wall clip to a wall using two screws (not supplied).
2. Slide the receiver into the clip until the two holes on the bottom of the receiver align with the
two holes on the lower flange of the clip.
3. Attach the receiver to the clip using the two Phillips pan head screws provided with the clip.
Figure 2.
Mounting the TW3004AR Using the Wall Clip
TW3004AR
SCREW, PHILLIPS
PAN HEAD WITH
LOCK WASHER (2)
WALL CLIP
LOWER
FLANGE
HORIZONTAL
MOUNTING HOLE (2)
VERTICAL
MOUNTING HOLE (2)
UPPER
FLANGE