Filter
Top Products
10 C1667M (6/06)
APPLICATIONS
You can connect the TW3004AR active receiver to transmitters, such as the TW3001P passive
transceiver, and the TW3001AT active transmitter, and to Pelco UTP cameras, such as the CC3710/
CC3610 series. Although you can connect these products using an unshielded twisted pair Cat3 and
Cat5 cable, Cat5e and Cat 6 are recommended for the best video performance.
Always connect the UTP wires on the Cat cable from + to + and from – to –. For example, if you
connect the blue wire to the + on the TW3004AR make sure you connect the other end of the blue wire
to the + on the transmitter.
Table A shows the maximum cable distance with Coaxitron or video only when connecting the
TW3004AR to a TW3001P passive transceiver with a particular type of Cat cable.
Table B shows the minimum size for a single wire and stranded wire.
Table A.
Cable Distance with TW3001P
Cable Type
Maximum Distance
(with Coaxitron)
Maximum Distance
(video only)
Cat3e 750 ft (229 meters) 1,500 ft (457 meters)
Cat5e 750 ft (229 meters) 3,000 ft (914 meters)
Cat5e 750 ft (229 meters) 4,000 ft (1,219 meters)
Cat6e 750 ft (229 meters) 4,000 ft (1,219 meters)
Table B.
Wire Gauge
Wire Gauge (minimum size)
Single Wire (solid)
24 AWG (0.25 mm
2
)
Stranded Wire (flexible)
24 AWG (1.0 mm
2
)