Filter
Top Products
C1667M (6/06) 7
Installation
The following parts are supplied:
1 Universal power supply (Part #PS04-1502-0512G)
1 Wall clip with screws and washers
1 Power connector 2-pin
1 UTP mating connector
1 Screwdriver
MOUNTING
The TW3004AR receiver is 3 rack units high and can be mounted into a fiber rack, onto a wall using
a fiber wall mount kit or into the supplied wall clip.
USING A RACK
You can mount a TW3004AR into either an RK5000PS-3U (with power supply) or an RK5000-3U
(without power supply). For more mounting information, refer to the RK5000PS-3U/RK5000-3U Fiber
Rack Mount Chassis Installation manual.
USING WALL MOUNT KITS
The optional WM5001-3U wall mount base kit allows attachment of a single TW3004AR to a wall.
Up to two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two
additional receivers to the wall. For more information, refer to the Fiber Wall Mount Kits Installation
manual.