Filter
Top Products
C1667M (6/06) 5
Description
The TW3004AR is a four-channel active receiver that can receive live video over unshielded twisted
pair (UTP) cable.
The adaptive technology in the TW3004AR automatically adjusts the low, medium, and high
frequency components of the video signal, allowing for the best possible video transmission.
The adaptive technology eliminates the need for manual adjustment by automatically adjusting to
provide the most favorable video transmission depending on cable length needed. The unit has been
optimized for use with Cat5e and Cat6 cable, although Cat3 and Cat5 cable can be used for shorter
distances.
The bottom of the TW3004AR has four DIP switches, one for each channel. Each DIP switch has five
small switches, four of which can be used to override the adaptive technology by manually selecting
the cable distance. Switches 2, 3, 4, and 5 can be set to 1,000 feet (305 meters), 2,000 feet
(610 meters), 3,000 feet (914 meters), and 4,000 feet (1,219 meters), respectively. Switch 1 can be set
to high mode and low mode.
The four LEDs on the front of the unit indicate the status of each channel. When an LED lights red
there is no UTP video being received. A green light means there is UTP video being received.
A flashing amber light means that there are Coaxitron
®
pan/tilt/zoom (PTZ) control commands being
transmitted. The blue Pelco badge indicates there is power, whether you are using the 4-pin rack
power connector or the 2-pin power connector.
The following features are found on the TW3004AR:
•
Full motion color/black and white video up to 4,000 feet (1,219 meters) with Cat5e or Cat6
•
Supports Coaxitron control (PTZ control signals) up to 750 feet (229 meters)
•
Compatible with all Pelco twisted-pair-equipped cameras, enclosures, and domes
•
Built-in surge suppression
•
Easy termination with removable UTP connector
•
Supports NTSC, PAL, and SECAM
•
Can be mounted into a Pelco fiber rack, wall mount base kit, or wall clip