Filter
Top Products
C2453M-C (7/05) 15
3. Enter the name of the software title where the blinking cursor appears on the screen.
Figure 13. Enter Software Title
4. Tap the Upload button. The software upload starts.
5. Wait until "Done" appears on the screen before unplugging the RJ-45 cable.
HOW TO DOWNLOAD SOFTWARE TO THE HANDHELD
1. Download the latest application software from the Remote Monitor Kit Resource CD or
Pelco's website (www.pelco.com) onto a desktop computer.
2. Use the HotSync
®
function to install the software file onto the handheld. Refer to the
manual supplied with the handheld for instructions on how to perform a HotSync
operation.
WARNING: Do not cycle power to the system during the upload process. The "Done" mes-
sage on the handheld indicates only that the first part of the upload is done. The upload pro-
cess is not complete until the system reboots and the "Configure Done" message appears on
the monitor.
SOFTWARE
FILE NAME
INDICATES
UPLOAD IS
COMPLETE
UPLOAD
BUTTON