Filter
Top Products
14 C2453M-C (7/05)
How to Upload Software
Operating software and language files can be uploaded to a Spectra III Series or ExSite system. The
latest version of the control/upload utility is installed on the handheld. To upload future revisions,
refer to How to Download Software to the Handheld
Software and language files cannot be uploaded to an Esprit system.
Only perform system upgrades when necessary. Software upgrades do not need to be performed if the
system is operating properly.
1. Assemble the remote monitor kit. Refer to How to Assemble the Remote Monitor Kit .
2. Tap the application icon.
Figure 12. Handheld Main Menu
WARNING: To upload software using the IPS-RDPE-2 remote data port the following
software must be installed:
• Spectra III dome drive must have operating software version 1.2 or higher installed.
• ExSite Explosionproof system must have operation software version 1.13 or higher
installed.
Software cannot be uploaded to an Esprit system.
WARNING: To prevent damage to the system, never cycle power or attempt control of the
unit during the upload process. The upload process is not complete until the system reboots
and the 'Configure Done' message appears on the monitor.
APPLICATION
ICON