Filter
Top Products
6
English
Using the trimmer
About the LCD panel
10 minutes after
charging is
completed
The backlight of the
LCD panel blinks
once every 2
seconds.
After charging is
completed
The backlight of the
LCD panel blinks
once every second.
While charging
The backlight of the
LCD panel glows.
During use
The battery capacity is low when “10%” appears and
blinks.
• A full charge will supply enough power for approx. 14 shaves of
3 minutes each.
•
You can shave 1 to 2 times after “10%” appears.
(This will differ depending on usage.)
Using the shaver
Shave
Press the On/Off
switch.
Hold the shaver as
illustrated above and
shave.
• Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
Use to select “SOFT” (soft) or
“LOCK” (lock).
You can change the pivot
action whether the shaver is
turned on or off.
SOFT
LOCK
Pivot action selector
Slide the trimmer handle up. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
The LCD panel shows the remaining battery capacity from 0% to
100%, in 10% increments.
ES8228_USA.indb 6 2006/08/21 15:51:39