Filter
Top Products
8
English
Reading the LCD panel when using
During use After use
The used time is shown.
The indicators turn off after
5 seconds.
The shown time returns to
[0’00”] after 10 minutes.
•
•
The used time and the
remaining battery capacity are
shown alternately after turning
off the shaver.
When the battery capacity is low
You can shave 1 to 2 times after “10%”
appears.
(This will differ depending on usage.)
•
“10%” appears and blinks.
A full charge will supply enough power for approx. 14 shaves of
3 minutes each. (This will differ depending on usage.)
•
Clean
Cleaning using the self‑cleaning recharger
Preparing the self‑cleaning recharger
Remove the shaver and the appliance plug from the self‑cleaning
recharger.
1
1
Remove the water tank and then
open the water tank cap.
2
2
Wash away the old cleaning
liquid and then rinse the water
tank.
3
3
Pour tap water into the water
tank.
Do not let the water rise above the maximum
water line. This may cause the cleaning liquid
to spill.
•
4
4
Securely close the water tank
cap and then attach the tank.