Filter
Top Products
16
How to Take Care of the Unit
How to Take Care of the Air Filter
Replace the air filter when it becomes dirty.
➀ Remove the nebulisation unit from the main
device.
➁ Remove the fan cover by lifting it up.
➂ Remove the air filter case from inside the fan
cover.
➃ Remove the air filter from the air filter case to
replace with a new one.
Assemble the above mentioned parts in the
reverse order.
How to Take Care of the Fan
Open the fan cover and remove the fan.
Clean the fan by washing it with water or detergent.
– If the medication is stuck to the fan installation
axis, remove the medication.
Remove the fan cover by lifting it up after removing
the nebulisation unit from the main device. The
dirty fan cover can be washed with water or
detergent.
In order to install the fan, position the fan to the fan
installation axis securely as far as it goes.
How to Take Care of the Main Unit
Clean the dust on the main unit by wiping it with a
lightly squeezed cloth after being moistened with
water or alcohol.
After draining water from the water tank of the
main unit through the draining hose, wipe off the
leftover water with a clean and dry cloth.
3
4
1
2
General Advice
• Do not wipe the main unit with volatile
chemicals, such as benzine or thinners.
• Do not damage the surface of the vibrator.
Nebulisation
section
Nebulisation
section
Fan installation
axis
Fan
Fan cover
EN
NE-U17-E.indb 16NE-U17-E.indb 16 14/12/2010 13:49:2814/12/2010 13:49:28