Filter
Top Products
10
How to Prepare the Unit before Inhalation
2
Filling medication into the medication
cup.
1) Remove the medication cup cover
by rotating it counterclockwise.
2)
Fill medication into the medication cup.
3) Assemble the medication cup cover
by turning it clockwise, then install
it to the main unit.
Maximum of 150 ml
1
2
3
Assembling and attaching the
nebulisation unit to the main unit
1) Fix the nebulisation unit by rotating
the medication cup cover-fixing
lever counterclockwise.
2)
Attach the inhalation hose and the
mouthpiece set.
3)
Turn on the Power Button ( ). After all
items on the LCD display illuminate, check
that the “ERROR display” does not flash.
If the “ERROR display” flashes, check the place where
the error number is indicated by referring to Page 19.
Note: As soon as the Power Button (
) is turned on, the
fan to cool the parts inside the main unit will start
rotating. This is normal.
WATER LEVEL
MEDICATION CUP
COVER
FAN COVER
1
2
3
WATER LEVEL
MEDICATION CUP
COVER
FAN COVER
1
2
3
1
2
water level
Hose holder
All items on
the display
illuminate.
Now the preparation
for inhalation is
completed.
Be sure to turn the
cover securely as
far as it goes.
Minimum of 5 ml.
EN
NE-U17-E.indb 10NE-U17-E.indb 10 14/12/2010 13:49:2514/12/2010 13:49:25