Filter
Top Products
15
How to Take Care of the Unit
How to Take Care of the Parts
1
Turn off the power by pushing the ON/
OFF Button (
), and unplug the
power plug from the electric outlet.
2
Remove the mouthpiece set, or
inhalation mask.
3
Rotate the medication cup cover-fixing
lever clockwise.
4
Remove the nebulisation
unit for disassembling.
5
Discard the remaining medication.
Discard the cooling water in the water
tank by using the draining hose.
6
Clean and disinfect the parts.
• Wipe the inside of the water tank by using alcohol.
• Clean, disinfect, and immediately dry the medication cup cover, medication cup holder,
medication cup, inhalation hose, mouthpiece set. (For the disinfection method, refer to Page 17.)
When assembling the cleaned, disinfected, and dried parts, do not touch the places where the medication and
the nebulised medication pass through directly with your hands to prevent possible infection.
Do not make any contact to the vibrator while the power plug is plugged into the electric outlet.
• You may suffer electric shock or injure yourself.
Draining
hose
Warning
NE-U17-E.indb 15NE-U17-E.indb 15 14/12/2010 13:49:2714/12/2010 13:49:27